Hours 9am-9pm EST (daily)
For Immediate Assistance Call
Website Administrator
Shaina Larson (940) 284-5242

Keywords:
Bidding extended on Open items for 3 minutes since last bid.
Category: TOOLS (257 records) SOLD---TUESDAY AUGUST 28TH at 10AM Wheeler Dealers Auction House - This auction closes AUGUST 28TH at a rate of 4 lots per min. 10:00AM
Previous page Next page

Item Photo Description Bids High
Bidder
Current
Amount
Next Bid
Required
Your
Bid
Your
Maximum
1 T_1.JPGHIGH QUALITY METRIC AND SAE 3/8" DRIVE SHORT SOCKETS FROM PARTS PLUS HOUSE BRAND PERFORMANCE PLUS MADE BY WILMAR CORP. AS SMALL AS 6MM TO AS LARGE AS 22MM AND 1/4" TO 7/8" (LOCATED IN FRONT COUNTER ROOM) 18 18556 2.05
x 30 = 61.50
  ended
2 T_2.JPGHIGH QUALITY METRIC AND SAE 3/8" & 1/2" DRIVE SHALLOW AND DEEP SOCKET SETS FROM PARTS PLUS HOUSE BRAND PERFORMANCE PLUS MADE BY WILMAR CORP. ASSORTED SIZES RANGING FROM 10MM TO AS LARGE AS 19MM AND 1/4" TO 1" DEPENDING ON THE SET. THERE IS ONE IMPACT TYPE SET. PRICED PER SET (LOCATED IN FRONT COUNTER ROOM) 19 10291 7.75
x 8 = 62.00
  ended
3 T_3.JPGHIGH QUALITY METRIC AND SAE 1/2" DRIVE SHORT- SOCKETS FROM PARTS PLUS HOUSE BRAND PERFORMANCE PLUS MADE BY WILMAR CORP. AS SMALL AS 12MM TO AS LARGE AS 27MM AND 1/2" TO 1 1/4" (LOCATED IN FRONT COUNTER ROOM) 11 18556 1.35
x 22 = 29.70
  ended
4 T_4.JPGHIGH QUALITY METRIC AND SAE 3/8" & 1/2" DRIVE DEEP SOCKETS FROM PARTS PLUS HOUSE BRAND PERFORMANCE PLUS MADE BY WILMAR CORP. AS SMALL AS 12MM TO AS LARGE AS 27MM AND 1/2" TO 1 1/4" (LOCATED IN FRONT COUNTER ROOM) 10 18556 2.00
x 51 = 102.00
  ended
5 T_5.JPGHIGH QUALITY METRIC AND SAE 1/2" DRIVE ADAPTERS & EXTENSIONS FROM PARTS PLUS HOUSE BRAND PERFORMANCE PLUS MADE BY WILMAR CORP. EXTENSIONS RANGE FROM 1 3/4" TO 10" THE ONE IN THE BAG IS AN ARMSTRONG 3/8" DR FLEXIBLE EXTENSION. (LOCATED IN FRONT COUNTER ROOM) 16 16110 2.64
x 15 = 39.60
  ended
10
T_10.JPGCRAFTSMAN TOOL CHEST WITH TOOLS AND 4 SHELVES STAND BENEATH IT. TOOLS INCLUDE OPENED END WRENCHES, SOCKETS, EXTENSIONS, ALLEN WRENCHES, CLUTCH FORKS, DRILL BITS, BOX CUTTER, TORQUE RATCHETS, ADDITIONAL SOCKETS. THERE ARE AT LEAST 50 SOCKETS, 3 RATCHETS, AND 3 EXTENSIONS. THERE ARE AT LEAST 10 COMBINATION OR OPENED END WRENCHES. THERE ARE ALSO PLIERS AND SCREWDRIVERS. THE PICTURED CONTENTS ON THE 4 LOWER SHELVES ARE NOT INCLUDED, AND ARE IN DIFFERENT LOTS. (LOCATED IN LEFT SERVICE BAY) 12 18556 89.00   ended
11 T_11.JPGHIGH QUALITY METRIC AND SAE 1/2" DRIVE RATCHETS, FLEX HEAD HANDLES & 1 THUMB DRIVE FROM PARTS PLUS HOUSE BRAND PERFORMANCE PLUS MADE BY WILMAR CORP. EXTENSIONS RANGE FROM 1 3/4" TO 10" (LOCATED IN FRONT COUNTER ROOM) 21 9901 6.50
x 9 = 58.50
  ended
12 T_12.JPGHIGH QUALITY ASSORTED STANDARD, CURVED, NEEDLE NOSE AND CUTTING PLIERS FROM PARTS PLUS HOUSE BRAND PERFORMANCE PLUS MADE BY WILMAR CORP. EXTENSIONS RANGE FROM 1 3/4" TO 10" (LOCATED IN FRONT COUNTER ROOM) 22 10291 8.75
x 8 = 70.00
  ended
13 T_13.JPGHIGH QUALITY ADJUSTABLE WRENCHES, LONG NOSE PLIERS AND LOCKING PLIERS FROM PARTS PLUS HOUSE BRAND PERFORMANCE PLUS MADE BY WILMAR CORP. EXTENSIONS RANGE FROM 1 3/4" TO 10" (LOCATED IN FRONT COUNTER ROOM) 15 18364 8.00
x 11 = 88.00
  ended
14 T_14.JPGHIGH QUALITY ASSORTED SIZES OF METRIC & SAE FLARE NUT WRENCHES FROM PARTS PLUS HOUSE BRAND PERFORMANCE PLUS MADE BY WILMAR CORP. EXTENSIONS RANGE FROM 1 3/4" TO 10" (LOCATED IN FRONT COUNTER ROOM) 14 8312 5.50
x 12 = 66.00
  ended
15 T_15.JPGHIGH QUALITY ASSORTED SIZES OF PHILLIPS & SLOTTED SCREWDRIVERS FROM PARTS PLUS HOUSE BRAND PERFORMANCE PLUS MADE BY WILMAR CORP. EXTENSIONS RANGE FROM 1 3/4" TO 10" (LOCATED IN FRONT COUNTER ROOM) 15 18364 6.00
x 22 = 132.00
  ended
16 T_16.JPGHIGH QUALITY ASSORTED SIZES & TYPES OF FILES ON HANDLES (EXCEPT ONE) FROM PARTS PLUS HOUSE BRAND PERFORMANCE PLUS MADE BY WILMAR CORP. THERE IS ALSO ONE OFF-BRAND PLANING BLADE. (LOCATED IN FRONT COUNTER ROOM) 14 18489 2.64
x 10 = 26.40
  ended
17 T_17.JPGHIGH QUALITY BALL PEEN HAMMERS (2)BAND A DOUBLE TAPE MEASURE SET FROM PARTS PLUS HOUSE BRAND PERFORMANCE PLUS MADE BY WILMAR CORP. (LOCATED IN FRONT COUNTER ROOM) 11 12400 4.00
x 3 = 12.00
  ended
18 T_18.JPGHIGH QUALITY ASSORTED SIZES & TYPES OF PUNCHES AND CHISELS FROM PARTS PLUS HOUSE BRAND PERFORMANCE PLUS MADE BY WILMAR CORP. (LOCATED IN FRONT COUNTER ROOM) 13 18489 3.50
x 7 = 24.50
  ended
19 T_19.JPGHIGH QUALITY METRIC COMBINATION WRENCHES FROM 6MM-24MM FROM PARTS PLUS HOUSE BRAND PERFORMANCE PLUS MADE BY WILMAR CORP. (LOCATED IN FRONT COUNTER ROOM) 18 17525 3.00
x 17 = 51.00
  ended
20 T_20.JPGHIGH QUALITY SAE COMBINATION WRENCHES FROM 1/4" TO 1 1/4" FROM PARTS PLUS HOUSE BRAND PERFORMANCE PLUS MADE BY WILMAR CORP. (LOCATED IN FRONT COUNTER ROOM) 17 17525 3.00
x 16 = 48.00
  ended
21 T_21.JPGHIGH QUALITY METRIC AND SAE 1/2" DRIVE SHALLOW IMPACT SOCKETS FROM PARTS PLUS HOUSE BRAND PERFORMANCE PLUS MADE BY WILMAR CORP. ASSORTED SIZES RANGING FROM 10MM TO AS LARGE AS 27MM AND 3/8" TO 1 1/4". PRICED PER SET (LOCATED IN FRONT COUNTER ROOM) 24 18556 2.45
x 28 = 68.60
  ended
22 T_22.JPGHIGH QUALITY METRIC AND SAE 1/2" DRIVE DEEP IMPACT SOCKETS FROM PARTS PLUS HOUSE BRAND PERFORMANCE PLUS MADE BY WILMAR CORP. ASSORTED SIZES RANGING FROM 10MM TO AS LARGE AS 32MM AND 3/8" TO 1 1/4". (LOCATED IN FRONT COUNTER ROOM) 10 18556 1.95
x 32 = 62.40
  ended
23 T_23.JPGHIGH QUALITY METRIC 3/8" DRIVE SHALLOW METRIC IMPACT SOCKETS, AS WELL AS EXTENSIONS AND ADAPTERS FROM PARTS PLUS HOUSE BRAND PERFORMANCE PLUS MADE BY WILMAR CORP. ASSORTED SIZES RANGING FROM 9MM TO AS LARGE AS 19MM (LOCATED IN FRONT COUNTER ROOM) 13 18556 1.38
x 22 = 30.36
  ended
24 T_24.JPGHIGH QUALITY METRIC 3/8" DRIVE DEEP METRIC IMPACT SOCKETS FROM PARTS PLUS HOUSE BRAND PERFORMANCE PLUS MADE BY WILMAR CORP. ASSORTED SIZES RANGING FROM 9MM TO AS LARGE AS 19MM (LOCATED IN FRONT COUNTER ROOM) 12 18556 2.05
x 11 = 22.55
  ended
25 T_25.JPGHIGH QUALITY METRIC 3/8" DRIVE SHALLOW & DEEP SAE IMPACT SOCKETS, AS WELL AS A LUG NUT REMOVER SET FROM PARTS PLUS HOUSE BRAND PERFORMANCE PLUS MADE BY WILMAR CORP. ASSORTED SIZES RANGING FROM 5/16" TO AS LARGE AS 7/8" (LOCATED IN FRONT COUNTER ROOM) 13 18556 1.41
x 20 = 28.20
  ended
26 T_26.JPGHIGH QUALITY ASSORTED TOOL SETS FROM PARTS PLUS HOUSE BRAND PERFORMANCE PLUS MADE BY WILMAR CORP. INCLUDES 6 PIECE STAR SCREWDRIVER SET, 10 PIECE HEX BIT SOCKET SET, 3 PIECE FLARE NUT WRENCH SET, 4 PIECE SAE BRAKE CALIPER HEX BIT SET, METRIC BRAKE CALIPER HEX BIT SET, AND 4 PIECE PUNCH & CHISEL SET (2). PRICED PER SET (LOCATED IN FRONT COUNTER ROOM) 17 17823 2.75
x 9 = 24.75
  ended
27 T_27.JPGHIGH QUALITY 8 PIECE CROWS FOOT WRENCH SET W351 TOOL SET FROM PARTS PLUS HOUSE BRAND PERFORMANCE PLUS MADE BY WILMAR CORP. (LOCATED IN FRONT COUNTER ROOM) 14 5008 9.34   ended
78 T_78.JPGPERFORMANCE TOOL 1/4 INCH DRIVE AIR RATCHET AND SUNEX TOOLS 3/8 AIR RATCHET WRENCH SX113. (LOCATED IN FRONT COUNTER ROOM) 18 15092 15.00
x 2 = 30.00
  ended
79
T_79.JPGPOSI LOCK HUB INTERNAL BARRING PULLER ADAPTER SET. (LOCATED IN FRONT COUNTER ROOM) 17 18556 24.50   ended
81
T_81.JPG4 PCS STUD PULLER SET, 4PCS METRIC PULLER SET, AND PULLEY PULLER & INSTALLER SET. (LOCATED IN FRONT COUNTER ROOM) 17 7213 9.50
x 3 = 28.50
  ended
82
T_82.JPGASSORTED CENTURY HIGH SPEED DRILL BITS. AS SMALL AS 1/16IN TO AS LARGE AS 29/64IN. (LOCATED IN FRONT COUNTER ROOM) 17 18548 1.90
x 36 = 68.40
  ended
83
T_83.JPGASSORTED SIZE CENTURY HIGH CARBON ALLOY DIES. (LOCATED IN FRONT COUNTER ROOM) 13 18565 1.40
x 77 = 107.80
  ended
84
T_84.JPGASSORTED SIZE CENTURY HIGH CARBON ALLOY TAPS. (LOCATED IN FRONT COUNTER ROOM) 14 18565 1.25
x 60 = 75.00
  ended
85
T_85.JPGASSORTED SPECIALTY TOOLS INCLUDING SNAP RING PLIERS, AIR BLOW GUN, CRANK SHAFT PULLEY HOLDING TOOL, HEATER HOSE DISCONNECT TOOL, ETC. (LOCATED IN FRONT COUNTER ROOM) 10 18556 1.25
x 13 = 16.25
  ended
87
T_87.JPGASSORTED SPECIALTY TOOLS INCLUDING FUEL LINE DISCONNECT TOOL, DISTRIBUTER CLAMP WRENCH, COIL SPRING COMPRESSOR, 12 VOLT TESTER, ETC. (LOCATED IN FRONT COUNTER ROOM) 9 17899 0.75
x 27 = 20.25
  ended
88
T_88.JPGASSORTED SPECIALTY TOOLS INCLUDING PISTON CYLINDER HONE, PISTON RING COMPRESSOR, STEERING WHEEL PULLER SET, BALL JOINT SEPARATOR, GEAR PULLER, ETC. (LOCATED IN FRONT COUNTER ROOM) 12 7213 1.65
x 24 = 39.60
  ended
89
T_89.JPGASSORTED SPECIALTY TOOLS INCLUDING CIRCUIT TESTER, TUBING CUTTER, SEVEN WAY CRIMPING TOOL, TIRE ROD & PITTMAN ARM PULLER, ETC. 9 18489 0.51
x 15 = 7.65
  ended
90
T_90.JPGASSORTED SPECIALTY TOOLS INCLUDING STAR SOCKETS, CALIPER WRENCHES, HEX KEY SETS, ETC. (LOCATED IN FRONT COUNTER ROOM) 7 15780 0.41
x 21 = 8.61
  ended
91
T_91.JPGASSORTED SPECIALTY TOOLS INCLUDING TUBING CUTTER, BRAKE BLEEDER WRENCHES, DOUBLE FLARE TOOL, AND RIVETER SET, HARMONIC BALANCER PULLER, ETC. (LOCATED IN FRONT COUNTER ROOM) 8 18565 1.74
x 36 = 62.64
  ended
92
T_92.JPGASSORTED HIGH QUALITY LARGE IMPACT SOCKETS, TOYOTA LOCK NUT SOCKET, OIL SENDER UNIT SOCKET, 4WD LOCK NUT SOCKETS, ETC. (LOCATED IN FRONT COUNTER ROOM) 19 17558 3.50
x 20 = 70.00
  ended
240
T_240.JPGASSORTED OIL PANS AS SHOWN (LOCATED IN FRONT COUNTER ROOM) 13 18556 3.59
x 4 = 14.36
  ended
298 T_298A.JPGASSORTED BRAND RESPIRATORS, SURFACE CONDITIONING DISCS, COLOR PREP SCUFF, ETC.(LOCATED IN FRONT COUNTER ROOM) 11 18489 6.16
x 8 = 49.28
  ended
299
T_299.JPGASSORTED SAND PAPER, GRINDING DISCS, ULTRA FINE HAND PADS, GOLD ABRASIVE DISCS, ETC.(LOCATED IN FRONT COUNTER ROOM) 12 18565 7.78
x 32 = 248.96
  ended
300
T_300.JPGASSORTED BRAND SAND PAPER ASSORTED GRITS AND SIZES AS SHOWN(LOCATED IN FRONT COUNTER ROOM) 8 6960 1.97
x 13 = 25.61
  ended
301 T_301.JPGPYLE CYCLE SERIES PLMCA60 SNOW MOBILE MOUNT AMPLIFIER, DUAL HANDLE BAR MOUNT ALUMINUM DIACAST SPEAKERS (LOCATED IN FRONT COUNTER ROOM) 4 15634 3.50   ended
458 T_458.JPGHAMMER AND VISE AND SHOWN. (LOCATED IN DORMAN ROOM NEXT TO BREAK ROOM) 15 12400 5.76
x 2 = 11.52
  ended
510 T_510.JPGLARGE CAPACITY FLOOR JACK AS SHOWN ( LOCATED IN SERVICE BAY 2 RIGHT SIDE OF MAIN ENTRANCE) 12 18268 17.00   ended
516
T_516.JPGSHELF LOT OF COILED AIR COMPRESOR HOSE, AUD AIR CONDITION HOSES, ETC. ( LOCATED IN SERVICE BAY 2 RIGHT SIDE OF MAIN ENTRANCE) 3 18489 0.11   ended
521 T_521.JPGASSORTED FLOOR JACKS AS SHOWN( LOCATED IN SERVICE BAY 2 RIGHT SIDE OF MAIN ENTRANCE) 11 18512 10.00
x 2 = 20.00
  ended
527 T_527.JPGACETYLNE TANK WITH HOSE AND TIP AS SHOWN( LOCATED IN SERVICE BAY 2 RIGHT SIDE OF MAIN ENTRANCE) 10 18097 8.76   ended
533 T_533.JPGPORTA POWER TYPE TOOL ACCESSORY AS SHOWN ( LOCATED IN SERVICE BAY 2 RIGHT SIDE OF MAIN ENTRANCE) 1 15634 0.25   ended
534 T_534.JPGTOOLBOX WITH ASSORTED SOCKETS, SWIVEL STYLE RATCHET, ETC.( LOCATED IN SERVICE BAY 2 RIGHT SIDE OF MAIN ENTRANCE) 10 15780 7.10   ended
535 T_535.JPGTOOLBOX WITH A COUPLE DOZEN HEAVY DUTY EXPENSIVE DRILL BITS( LOCATED IN SERVICE BAY 2 RIGHT SIDE OF MAIN ENTRANCE) 10 12400 9.75   ended
539
T_539.JPGASSORTED HAND TOOLS, GAUGES, PULEY,ETC AS SHOWN( LOCATED IN SERVICE BAY 2 RIGHT SIDE OF MAIN ENTRANCE) 4 15780 4.50   ended
541 T_541.JPGASSORTED PNEUMATIC RATCHETS- NOT TESTED( LOCATED IN SERVICE BAY 2 RIGHT SIDE OF MAIN ENTRANCE) 6 18003 2.40
x 4 = 9.60
  ended
544
T_544.JPGASSORTED PNEAUMATIC AND ELECTRIC DRILLS, IMPACT GUNS, ETC. NOT TESTED( LOCATED IN SERVICE BAY 2 RIGHT SIDE OF MAIN ENTRANCE) 9 6732 4.89
x 5 = 24.45
  ended
548
T_548.JPG BOX OF SEVERAL ASSORTED 3/4" AND 1" DRIVE CRAFTSMAN SOCKETS, BREAKER BARS, EXTENSIONS. THERE MAY BE OTHER BRANDS AS WELL. THERE IS EASILY 500 DOLLARS IN TOOLS HERE.( LOCATED IN SERVICE BAY 2 RIGHT SIDE OF MAIN ENTRANCE) 16 18489 2.55
x 34 = 86.70
  ended
556 T_556.JPGVINTAGE SILVER BEAUTY BRAND MODEL 440 GROWLER ARMITURE TESTER( LOCATED IN SERVICE BAY 2 RIGHT SIDE OF MAIN ENTRANCE) 3 17269 0.11   ended
557
T_557.JPGFACTORY RECONDITIONED CAMPBELL HAUSFELD PAINT SPRAYER ON CART AS SHOWN. ( LOCATED IN SERVICE BAY 2 RIGHT SIDE OF MAIN ENTRANCE) 13 12400 26.50   ended
558 T_558.JPGASSORTED BOTTLE JACKS, JACK STANDS, ETC. AS SHOWN. ( LOCATED IN SERVICE BAY 2 RIGHT SIDE OF MAIN ENTRANCE) 15 7005 3.50
x 9 = 31.50
  ended
559 T_559.JPGASSORTED CUSTOM MOVERS AS SHOWN. ( LOCATED IN SERVICE BAY 2 RIGHT SIDE OF MAIN ENTRANCE) 3 18489 0.90
x 3 = 2.70
  ended
560
T_560.JPGASSORTED LEVELS, C-CLAMP, PIPES, ETA. ( LOCATED IN SERVICE BAY 2 RIGHT SIDE OF MAIN ENTRANCE) 2 17375 0.55
x 7 = 3.85
  ended
564 T_564.JPGELECTRO SPECIALTIES RPM BLAND MONITOR 1109. ( LOCATED IN SERVICE BAY 2 RIGHT SIDE OF MAIN ENTRANCE)         ended
565 T_565.JPGHEATING IRON'S FOR SILK SCREENING SHIRTS ( LOCATED IN SERVICE BAY 2 RIGHT SIDE OF MAIN ENTRANCE) 3 18499 1.05   ended
569 T_569.JPGKEY WRENCH FOR REMOVING LUG NUTS FOR DUALIE, DENT PULLER, TORCH WRENCH, VISE. ( LOCATED IN SERVICE BAY 2 RIGHT SIDE OF MAIN ENTRANCE) 6 18003 5.01
x 3 = 15.03
  ended
575
T_575.JPGCLARKE PARTS WASHER AS SHOWN. ( LOCATED IN SERVICE BAY 2 RIGHT SIDE OF MAIN ENTRANCE) 14 10291 15.25   ended
579
T_579.JPGRED METAL JOB BOX FOR PICK UP TRUCK. AS SHOWN. APPROX. 69" LONG X 25" WIDE X 17" TALL. HEAVY ITEM PLEASE BRING HELP TO LIFT. ( LOCATED IN SERVICE BAY 2 RIGHT SIDE OF MAIN ENTRANCE) 9 1202 9.25   ended
581 T_581.JPGDIFFERENTIAL GEAR OIL PUMP, HOSE AND BUCKET AS SHOWN. ( LOCATED IN SERVICE BAY 2 RIGHT SIDE OF MAIN ENTRANCE) 6 18573 4.50   ended
583
T_583.JPGCUMMINS 20 GALLON PARTS WASHER, INCLUDING CONTENTS ON TOP AND LOWER SHELF 4 8312 8.25   ended
587 T_587.JPG2 TON TRANSMISSION STANDS AS SHOWN. DOES NOT INCLUDE AUTOMOTIVE PARTS THAT'S ON THE UNIT ON THE RIGHT. ( LOCATED IN SERVICE BAY 2 RIGHT SIDE OF MAIN ENTRANCE) 11 6960 32.00
x 2 = 64.00
  ended
590 T_590.JPGMETAL CAR RAMPS. AS SHOWN. ( LOCATED IN SERVICE BAY 2 RIGHT SIDE OF MAIN ENTRANCE) 12 18268 7.02
x 2 = 14.04
  ended
591
T_591.JPGSKILSAW BRAND 10" TABLE SAW. AS SHOWN. HEAVY ITEM BRING HELP TO LOAD. ( LOCATED IN SERVICE BAY 2 RIGHT SIDE OF MAIN ENTRANCE) 16 18489 44.50   ended
592 T_592.JPGTORIN BRAND BIG RED JACK, 1000LB TRANSMISSION JACK.( LOCATED IN SERVICE BAY 2 RIGHT SIDE OF MAIN ENTRANCE) 14 18489 62.00   ended
594
T_594.JPGRED ENGINE STAND-STAND ONLY. AS SHOWN.( LOCATED IN SERVICE BAY 2 RIGHT SIDE OF MAIN ENTRANCE) 10 12506 18.77   ended
595
T_595.JPGORANGE ENGINE STAND - STAND ONLY. AS SHOWN. ( LOCATED IN SERVICE BAY 2 RIGHT SIDE OF MAIN ENTRANCE) 8 18489 9.50   ended
597
T_597.JPGASSORTED HAND TOOLS INCLUDING SAWZALL, ROTARY SKILLSAW, JIGSAW, ETC( LOCATED IN SERVICE BAY 2 RIGHT SIDE OF MAIN ENTRANCE) 9 18003 4.25
x 4 = 17.00
  ended
598
T_598.JPGBENCH GRINDER, ROLL OF HEAVY GAGE WIRE, AND SPARK PLUG WIRES AS SHOWN. ( LOCATED IN SERVICE BAY 2 RIGHT SIDE OF MAIN ENTRANCE) 10 18489 8.75
x 2 = 17.50
  ended
599
T_599.JPGECHO CHAINSAW, HAND SAW AND RIGHT ANGLE AS SHOWN. ( LOCATED IN SERVICE BAY 2 RIGHT SIDE OF MAIN ENTRANCE) 14 18489 28.00   ended
603
T_603.JPGA CUMMINS 6" BENCH GRINDER, AND A CRAFTSMAN 6" BENCH GRINDER. ( LOCATED IN SERVICE BAY 2 RIGHT SIDE OF MAIN ENTRANCE) 14 18503 26.50   ended

Bidder number Password Increments

Select page to view:
p1

Home       Auction Calendar       Past Auctions       Register to Bid       About Us       Contact Us
    
Texas Resale Certificate      Texas Sales and Use Tax Exemption Certification
    
We are licensed and regulated by the
Texas Department of Licensed and Regulation to do live auctions
For any un-resolved complaints feel free to contact them directly
PO BOX 12157 Austin Texas 78711
800-803-9202
All contents copyright © 2011 Dallas Online Auction Co.  Website Design by WWAC INC